Goldenwarm Cabinet Handle Template Drill Mounting Template (1 Pack) – HDTM160 Template Guide for Cabinet Knobs

KITS INCLUDES: – (1) Knob Drilling Template – (1) Pull Drilling Template – (1) 3/16″ Drill bit.

Top Positive Review

Awesome guide. The 3 in the picture are the first handles i have ever installed. I don’t do this for a living and kinda said to myself it I get this wrong then who cares. But the guide helped a lot. I used the 102mm (4in) guide for my 4in handles. I measured and re measured to make sure the guide was accurate. I had to do the bot with my pencil at the bottom of thw bottom 102mm circle and a dot at the top of the top 102mm circle. The top screw came a little bit off at an angle but not significant enough to cause problems. Once I tighten the screw with little to none toque it fit perfectly. The end result is what I was looking for not the process so I am happy with this guide.

Top Critical Review

Don’t use the bit It works but mine was bent so im sure all my holes are way bigger then a 3/16 bit hole size go to your local store that sells bits and get a better quality one best advantage to reading this Is you will have a nice clean hole not a wobble one like I ended up with.

Customer Questions & Answers

what inexpensive template can i use for 7 1/2 inch center holes ?
Answer: You might have to create your own template. You might have to measure how wide each holes and extend to what you need. Hope it works out.

Will this work for 152mm center to center?
Answer: Aligns from 2-1/2″(64mm), 3″(76mm), 3-1/2″(90mm), 3-3/4″(96mm), 4″(102mm), 4-1/2″(115mm), 5″(128mm) and 6-1/4″(160mm) handles.